[ADMB Users] compiling ADMB | RHEL 5.5

Evan Cooch evan.cooch at gmail.com
Thu Mar 24 05:57:11 PDT 2011


Done -- and success! (At least, configure/make/make install worked 
without failures).

Many thanks to all for their  help/guidance (patience!).

On 3/23/2011 8:54 PM, Johnoel Ancheta wrote:
> Replace the file scripts/configure/GNUmakefile.in with the attached file,
> then configure,make,make install.
>
>
> On 3/21/11 11:16 AM, Johnoel Ancheta wrote:
>> Yes, it was fixed, but not yet released.  After running configure,
>> edit the generated GNUmakefile.  Locate the line
>>
>> install -m 555 scripts/g++/admb-bin /usr/local/bin/admb
>>
>> and change to
>>
>> install -m 555 scripts/*admb*/admb-bin /usr/local/bin/admb
>>
>> then
>>
>> $ make install.
>>
>> An easier approach would be to just copy the distribution folder
>> build/admb-*/admb-* to your home folder, then set ADMB_HOME
>> to that.
>>
>> On 3/21/11 11:07 AM, aaron wrote:
>>> Hum this is really interesting.
>>> What were the warnings? It looks like the 32bit compile worked ok...
>>> except that make  looked for admb-bin in the wrong directory.  This 
>>> could have been fixed recently.
>>> The configure log would be good to see.
>>>
>>> Aaron
>>>
>>>
>>>
>>>
>>> On 03/21/2011 01:18 PM, Evan Cooch wrote:
>>>> As an attachment -- to you off-list, or to the list at large?
>>>>
>>>> On 3/21/2011 3:37 PM, Johnoel Ancheta wrote:
>>>>> Can you send the config.log?
>>>>>
>>>>> On 3/20/11 7:24 AM, Evan Cooch wrote:
>>>>>> Greetings --
>>>>>>
>>>>>> I've been trying (without success) to compile ADMB (10.x) from 
>>>>>> source on a machine  running x86_64 RHEL (which, as many or you 
>>>>>> might know, uses gcc 4.1.2).  I'm hoping the solution isn't as 
>>>>>> simple as 'you have to have gcc 4.4.x to compile ADMB -- if so, 
>>>>>> then this lets out RHEL, CentOS, and Scientific Linux, all of 
>>>>>> whom stay far from the bleeding edge and use 4.1.x).
>>>>>>
>>>>>> So, here is what I've tried -- followed the basic instructions in 
>>>>>> the README file -- downloaded latest admb-10.0.zip. Extracted, 
>>>>>> then (from bash shell) run ./configure BUILD_64BIT=yes
>>>>>>
>>>>>>
>>>>>> While the screen dump didn't indicate any problems, looking 
>>>>>> deeper into the configure.log showed multiple 'issues'. First, 
>>>>>> picks up gcc fine
>>>>>>
>>>>>> configure:2117: checking for gcc
>>>>>> configure:2133: found /usr/bin/gcc
>>>>>> configure:2144: result: gcc
>>>>>> configure:2373: checking for C compiler version
>>>>>> configure:2382: gcc --version >&5
>>>>>> gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48)
>>>>>>
>>>>>>
>>>>>> First errors show up when looking at C++ preprocessor:
>>>>>>
>>>>>> configure:3128: checking how to run the C++ preprocessor
>>>>>> configure:3155: g++ -E  conftest.cpp
>>>>>> configure:3155: $? = 0
>>>>>> configure:3169: g++ -E  conftest.cpp
>>>>>> conftest.cpp:9:28: error: ac_nonexistent.h: No such file or directory
>>>>>> configure:3169: $? = 1
>>>>>> configure: failed program was:
>>>>>> | /* confdefs.h */
>>>>>> | #define PACKAGE_NAME "ADMB"
>>>>>> | #define PACKAGE_TARNAME "admb"
>>>>>> | #define PACKAGE_VERSION "10.0"
>>>>>> | #define PACKAGE_STRING "ADMB 10.0"
>>>>>> | #define PACKAGE_BUGREPORT "users at admb-project.org"
>>>>>> | #define PACKAGE_URL ""
>>>>>> | /* end confdefs.h.  */
>>>>>> | #include <ac_nonexistent.h>
>>>>>> configure:3194: result: g++ -E
>>>>>> configure:3214: g++ -E  conftest.cpp
>>>>>> configure:3214: $? = 0
>>>>>> configure:3228: g++ -E  conftest.cpp
>>>>>> conftest.cpp:9:28: error: ac_nonexistent.h: No such file or directory
>>>>>> configure:3228: $? = 1
>>>>>> configure: failed program was:
>>>>>> | /* confdefs.h */
>>>>>> | #define PACKAGE_NAME "ADMB"
>>>>>> | #define PACKAGE_TARNAME "admb"
>>>>>> | #define PACKAGE_VERSION "10.0"
>>>>>> | #define PACKAGE_STRING "ADMB 10.0"
>>>>>> | #define PACKAGE_BUGREPORT "users at admb-project.org"
>>>>>> | #define PACKAGE_URL ""
>>>>>> | /* end confdefs.h.  */
>>>>>>
>>>>>> and later on
>>>>>>
>>>>>> configure:3621: checking lex library
>>>>>> configure:3635: g++ -o conftest -g -O2   conftest.cpp >&5
>>>>>> conftest.l: In function 'int yylex()':
>>>>>> conftest.l:6: error: 'input' was not declared in this scope
>>>>>> configure:3635: $? = 1
>>>>>> configure: failed program was:
>>>>>> | /* confdefs.h */
>>>>>> | #define PACKAGE_NAME "ADMB"
>>>>>> | #define PACKAGE_TARNAME "admb"
>>>>>> | #define PACKAGE_VERSION "10.0"
>>>>>> | #define PACKAGE_STRING "ADMB 10.0"
>>>>>> | #define PACKAGE_BUGREPORT "users at admb-project.org"
>>>>>> | #define PACKAGE_URL ""
>>>>>> | #define STDC_HEADERS 1
>>>>>> | #define HAVE_SYS_TYPES_H 1
>>>>>> | #define HAVE_SYS_STAT_H 1
>>>>>> | #define HAVE_STDLIB_H 1
>>>>>> | #define HAVE_STRING_H 1
>>>>>> | #define HAVE_MEMORY_H 1
>>>>>> | #define HAVE_STRINGS_H 1
>>>>>> | #define HAVE_INTTYPES_H 1
>>>>>> | #define HAVE_STDINT_H 1
>>>>>> | #define HAVE_UNISTD_H 1
>>>>>> | #define HAVE_IOSTREAM 1
>>>>>> | /* end confdefs.h.  */
>>>>>> | /* A lexical scanner generated by flex*/
>>>>>> |
>>>>>> | /* Scanner skeleton version:
>>>>>> |  * $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 
>>>>>> 96/09/10 16:58:48 vern Exp $
>>>>>> |  */
>>>>>>
>>>>>>
>>>>>> Tried a 32-bit build -- same errors.
>>>>>>
>>>>>> Now, I did proceed and try make, lots of warnings, but no 
>>>>>> outright fails. However, make install crashed and burned:
>>>>>>
>>>>>> install -d -m 555 /usr/local/admb/bin /usr/local/admb/include 
>>>>>> /usr/local/admb/lib /usr/local/admb/docs /usr/local/admb/examples
>>>>>> install -m 555 
>>>>>> build/admb-10.0-linux-gcc4.1.2-64bit/admb-10.0-linux-gcc4.1.2-64bit/bin/* 
>>>>>> /usr/local/admb/bin
>>>>>> install -m 444 
>>>>>> build/admb-10.0-linux-gcc4.1.2-64bit/admb-10.0-linux-gcc4.1.2-64bit/include/* 
>>>>>> /usr/local/admb/include
>>>>>> install -m 444 
>>>>>> build/admb-10.0-linux-gcc4.1.2-64bit/admb-10.0-linux-gcc4.1.2-64bit/lib/* 
>>>>>> /usr/local/admb/lib
>>>>>> install -m 444 LICENSE /usr/local/admb
>>>>>> install -m 444 README.txt /usr/local/admb
>>>>>> install -m 444 Makefile /usr/local/admb
>>>>>> install -m 555 scripts/g++/admb-bin /usr/local/bin/admb
>>>>>> install: cannot stat `scripts/g++/admb-bin': No such file or 
>>>>>> directory
>>>>>> make: *** [install] Error 1
>>>>>>
>>>>>>
>>>>>> At this point, I'll take any and all suggestions, no matter how 
>>>>>> trivial (save for installing gcc 4.4.x).
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at admb-project.org
>>>>>> http://lists.admb-project.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at admb-project.org
>>>>> http://lists.admb-project.org/mailman/listinfo/users
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at admb-project.org
>>>> http://lists.admb-project.org/mailman/listinfo/users
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at admb-project.org
>>> http://lists.admb-project.org/mailman/listinfo/users
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at admb-project.org
>> http://lists.admb-project.org/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at admb-project.org
> http://lists.admb-project.org/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.admb-project.org/pipermail/users/attachments/20110324/64b00f31/attachment.html>


More information about the Users mailing list